Figure 2
Remove the 2 screws and reassemble into the desired mode as shown in the installation modes below with the additional screws provided.
The 3 fundamental modes of installation are
1) Standard Upright – Base system sitting without any support shown in figure 3,4,5
2) Inverted mounting – 2 screws mounted on supported plane shown figure 6,7
3) Stacking – multiple layers of figurine disc shown in figure 8 (optional)
Different mounting can be configured in the users’ preference as below and many more.
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8